Yamaha NS-B750BR Owners Manual - Page 3

PLACING THE SPEAKERS ■Using as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners. CONNECTIONS TO YOUR AMPLIFIER This speaker system is capable of standard connections and biwire connection. Before making connections, make sure that the amplifier is switched off. Standard connections Leave the short bars in place when connecting. ■Using as front speakers in a multi channel system Position the speakers on both sides of the TV. The positioning of speakers is important, since this dictates the overall sound quality of the multi channel system. Set up the speakers on the basis of your listening position by following the owner's manual supplied with your amplifier. NS-B750 Loosen Short bar Black (-) Insulation coating NS-B750 Tighten Red (+) Bare wire NS-B750 Subwoofer Center Speakers output terminals of the amplifier (or receiver) SPEAKERS R +- L A -+ B Surround back Surround Notes • Placing this unit too close to a CRT TV set might impair picture color or create a buzzing noise. Should this happen, move the speaker away (more than 20 cm (7-7/8")) from the TV set. • To avoid accidents resulting from tripping over loose speaker cables, fix them to the floor. Amplifier or Receiver • Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the amplifier (or receiver) with the speaker cable. • Connect the (+) terminals on the amplifier (or receiver) to the (+) terminal of each speaker, making sure to confirm the colorcoded wire of the cable at each end. Use the other wire of the cable to connect the (-) terminals of the components. • Connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals, making sure not to reverse the polarity (+, -). If one speaker is connected with reversed polarity the sound will be unnatural and lack bass. English 1 En