Yamaha NS-BP182 NS-BP182 Owners Manual - Page 2

English PRECAUTIONS • Install the speakers in a cool, dry, clean, stable and horizontal place. • To avoid electric shock, fire, injury, damage to the speakers, and discoloration of the cabinet, install away from windows, heat sources, sources of excessive vibration, dust, moisture, cold, rain, water, falling objects, noise sources (transformers, motors, etc.) and direct sunlight. • Do not insert a hand or object into the port or pick up the speaker by holding the port, as it may cause personal injury or damage to the speaker. • Any time you note distortion, reduce the volume control on your receiver to a lower setting. Never allow your receiver to be driven into "clipping". Otherwise the speakers may be damaged. • When using a receiver with a rated output power higher than the nominal input power of the speakers, care should be taken never to exceed the speakers' maximum input. • Do not attempt to clean the speakers with chemical solvents (ex. alcohol or thinners etc.); this might damage the finish. Use a clean, dry cloth. • Do not attempt to modify or fix the speakers. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons. • Secure placement or installation is the owner's responsibility. Yamaha shall not be liable for any accident caused by improper placement or installation of speakers. ACCESSORIES The following items are included. Speaker cable (2 m) × 2 / Grille × 2 ATTACHING THE GRILLE The speaker and the grille are packed separately. To attach the grille, line up the projections (magnets) on the reverse side of the grille with their corresponding screw heads on the speaker. Note When the grille is removed, be sure not to touch the speaker units with your hands or to exert excessive force with tools. CONNECTION TO YOUR RECEIVER BEFORE MAKING CONNECTIONS, MAKE SURE THAT THE RECEIVER IS SWITCHED OFF. When this unit is connected to the receiver, refer also to the owner's manual supplied with the receiver. See page 1 for the connection method. PLACING THE SPEAKERS (L) (R) • Place the speakers on a sturdy, vibration-free surface. • Better stereo images will be obtained when the speakers are slightly angled in towards the listening position. • Be sure to connect the left channel (L) and right channel (R) properly. Note Placing the speakers too close to a CRT-type TV may impair the picture color or cause a buzzing noise. In this case, move the speakers away from the TV. This is not an issue with LCD and plasma TVs. SPECIFICATIONS Type 2-way bass-reflex speaker system Non-magnetic shielding Type Driver 12 cm (4-3/4") cone woofer 3 cm (1-1/4") soft dome tweeter Impedance 6 Ω Frequency Response 60 Hz to 40 kHz (-10 dB) 100 kHz (-30 dB) Nominal Input Power 40 W Maximum Input Power 110 W Sensitivity 83 dB/2.83 V, 1 m Crossover Frequency 5 kHz Dimensions (W × H × D 154 × 273 × 230 mm (6" × 10-6/8" × 9") Weight 3.3 kg (7.2 lbs.) * Specifications are subject to change without notice due to product improvements. * Care should be taken not to exceed the input power values noted above. 2 En