Yamaha NS-C310 Owners Manual - Page 4
For NS-C310, Using as center speaker, To mount the speakers on a wall by using
View all Yamaha NS-C310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
For NS-C310 ■Using as center speaker Place the speaker on a TV rack or other stable surface. To prevent the speaker from falling down, attach the fasteners provided in each corner of the speaker's underside. Fastener ■To mount the speakers on a wall by using the attached mounting bracket Fasten screws into a firm wall or wall support as shown in the figure, and hang the holes of the mounting bracket on the protruding screws. Note Placing this unit too close to a CRT TV set might impair picture color or create a buzzing noise. Should this happen, move the speaker away (more than 20 cm (7-7/8")) from the TV set. When using a PDP or LCD TV, it would not happen. WARNING • NS-C310 weighs 2.9 kg (6 lbs. 6 oz.). Do not mount it on thin plywood or a wall with soft surface material. If mounted, the screws may come out and the speaker may fall. This may damage the speaker, or cause personal injury. • Do not touch the adhesive surface after peeling off the seal as this will weaken its adhesive strength. • Thoroughly wipe clean the surface where the fasteners are to be attached. Note that adhesive strength is weakened if the surface is dirty, oily or wet, and that this may cause the center speaker to drop. • Do not install the speaker on a wall with nails, adhesives, or any other unstable hardware. Long term use and vibrations may cause it to fall. • To avoid accidents resulting from tripping over loose speaker cables, fix them securely to the floor or wall. Make sure that the screws are secured in the narrow sections of the holes. 320 mm (12-9/16") Diameter. 3.5 to 4 mm (1/8" to 3/16") Wall or wall support 3 mm (1/8") Min. 20 mm (13/16") Tapping screw (Available at the hardware store) 2 En