Yamaha NS-M225P Owners Manual - Page 3

English Fasten screws into a firm wall or wall support as shown in the figure below, and hang the holes on the protruding screws. NS-M225 Diam. 3.5 to 4 mm (1/8") 3 mm (1/8") Min. 20 mm (3/4") Tapping screw (commercially available) Wall or wall support WARNING: • Each speaker weights 2.4 kg (5.3 lbs). Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury. • Do not fasten the speakers to wall with nails, adhesives, or other unsound hardware. Long term use and vibrations may cause them to fall down. • To avoid accidents resulting from tripping over loose speaker cords, fix them to the wall. Note: You can also use the screw holes on the bottom of the NS-M225 for installing the speakers on commercially available speaker stands. A screw with a diameter of 4 mm (1/8") can be used (Hole depth: 13 mm, 1/2") • Before installing, please refer to the instruction manual of the speaker stand. 60 mm (2-3/8") E-3