Yamaha NS-M325BL Owners Manual - Page 3
Connections To Your Amplifier, English - receiver
UPC - 027108923239
View all Yamaha NS-M325BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
English CONNECTIONS TO YOUR AMPLIFIER Before making connections, make sure that the amplifier is switched off. Loosen Black (-) - Tighten Red (+) + NS-M325 NS-M325 (R) (L) Speakers output terminals of the amplifier (or receiver) SPEAKERS R +- L A -+ B Amplifier or Receiver ■ CONNECTIONS • Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the amplifier (or receiver) with the speaker cable. • Connect the (+) terminals on the amplifier (or receiver) and the speakers using one side of the cable. Connect the (-) terminals on both components using the other side of the cable. • Connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals, making sure not to reverse the polarity (+, -). If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass. How to connect: 1 Loosen the knob. 2 Remove the insulation coating at the extremity of each speaker cable by twisting the coating off. 3 Insert the bare wire. 4 Tighten the knob and secure the cables. Test the firmness of the connection by pulling lightly on the cables at the terminal. Note: Do not let the bare speaker wires touch each other as this could damage the speaker or the amplifier, or both of them. When using a banana plug Banana plug 3 1 2 1 Remove the cover by pulling it toward you. 2 Tighten the terminal knob. 3 Simply insert the banana plug into the terminal. E-3