Yamaha NX-U10 Owner's Manual - Page 8
When using the USB/AC adaptor, Connect the large plug of the USB cable
UPC - 027108927794
View all Yamaha NX-U10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
When the inserted Windows 98SE CD-ROM is not recognized Even when the CD-ROM is inserted, your computer may display an error message if it cannot find the location of the CD-ROM drive. In this case, it is required to specify the location manually. If this error occurs during installation of USB Human Interface Device: Window: [Disc insertion] (Error message) T Click [OK] Window: [Open] "Drive (V):" (Pull-down menu) Select the drive in which the CD-ROM is inserted "Folder (F):" (Field) Select [win98] "Filename (N):" (Field) Select [base6.cab] T Click [OK] Window: [Copy File] "File Copy Source (C):" (Field) Check the drive name selected above T Click [OK] Check "Windows has finished installing the software that your new hardware device requires." is displayed Click [Finish] If this error occurs during installation of USB Audio Device: Window: [Disc insertion] (Error message) T Click [OK] Window: [Open] "Drive (V):" (Pull-down menu) Select the drive in which the CD-ROM is inserted "Folder (F):" (Field) Select [win98] "Filename (N):" (Field) Select [driver21.cab] T Click [OK] Window: [Copy File] "File Copy Source (C):" (Field) Check the drive name selected above T Click [OK] Check "Windows has finished installing the software that your new hardware device requires." is displayed Click [Finish] • Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. • Macintosh is a trademark of Apple Computer, Inc., registered in the United States and other countries. 2 When using the USB/AC adaptor Large USB plug The supplied USB/AC adaptor Computer, Portable audio player etc. 5 Concave portion 3 4 6 1 2 The supplied USB Cable (small plug) The supplied 3.5 mm stereo mini plug cable * The shape of the USB/AC adaptor may vary depending on the area where you purchased. 1 Press and hold the concave portion on the stand and open it upward. 2 Connect the small plug of the supplied USB cable to the USB jack of this unit. 3 Connect the large plug of the USB cable to the USB/AC adaptor. 4 Connect an audio output jack of your portable audio player and the PORTABLE jack of this unit using the supplied 3.5 mm stereo mini plug cable. 5 Plug the USB/AC adaptor to the AC wall outlet. 6 Put this unit on a flat surface (a desk etc.) using the stand. Note When setting up this unit, do not apply force to the top of this unit. Doing so may cause damage or break the stand. 4 En