Yamaha NX-U10SL Owner's Manual - Page 6
CONNECTIONS, 1 When using USB bus power - usb powered
UPC - 100000012376
View all Yamaha NX-U10SL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
CONNECTIONS Use the procedure below to choose one of the three power supplies according to your usage circumstances. 1 When using USB bus power (this page) 2 When using the USB/AC adaptor (page 4) 3 When using batteries (page 5) Notes • Before connecting, make sure that POWER switch on this unit is turned off. • Before connecting, make sure that VOLUME dial on this unit is set to the minimum. 1 When using USB bus power When you connect the USB port for the first time, you need to download USB drivers into your computer. For the procedure of the installing USB drivers, see "Installation of USB drivers" on page 3. Concave portion The supplied USB Cable 4 Computer 3 1 2 (Large plug) USB cable (small plug) 1 Press and hold the concave portion on the stand and open it upward. 2 Connect the small plug of the supplied USB cable to the USB jack of this unit. 3 Connect the large plug of the USB cable to the USB port of your computer. Note Never connect your computer via an USB hub. This unit may not work properly. 4 Put this unit on a flat surface (a desk etc.) using the stand. Note When setting up this unit, do not apply force to the top of this unit. Doing so may cause damage or break the stand. 3.5 mm stereo mini plug cable Enjoying sounds of a portable audio player using the USB bus power You can also enjoy the sound of a portable audio player using a computer as power source when you connect a portable audio player to the PORTABLE jack of this unit using the supplied 3.5 mm stereo mini plug cable. Note In this case, the sound output from this unit is mixed with the sound from your computer. Adjust the mixing level using volumes of your computer's media player or your portable audio player. 2 En