Yamaha P-155 Owner's Manual - Page 20
Adding Variations to the Sound - [BRILLIANCE]/ [REVERB]/[EFFECT]/\, BRILLIANCE], REVERB]
View all Yamaha P-155 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ENGLISH Selecting & Playing Voices Adding Variations to the Sound - [BRILLIANCE]/ [REVERB]/[EFFECT]/"Damper Resonance" [-/NO] [+/YES] buttons [BRILLIANCE] button [EFFECT] button [REVERB] button [BRILLIANCE] You can use this control to adjust the brilliance of the tone and change the tonality to suit your preference. BRIGHT: Bright tone NORMAL: Standard tone MELLOW: Soft and mellow tone To select a brilliance type, press the [BRILLIANCE] button a few times until the indicator corresponding to the desired type lights (the indicator lights in sequence each time you press the [BRILLIANCE] button). Brilliance can be selected among five types. When two adjacent indicators are lit, the type that is between the two indicated types is selected. For example, when both NORMAL and MELLOW are lit, the brilliance setting between NORMAL and MELLOW is selected. NOTE Default setting = NORMAL NOTE When the BRILLIANCE is set to BRIGHT, the overall sound will be slightly louder. If the MASTER VOLUME is set at a high level the sound may become distorted. If so, lower the MASTER VOLUME level. [REVERB] This control enables you to select various digital reverb effects for adding extra depth and expression to the sound and creating a realistic acoustic ambience. OFF: When no reverb effect is selected, no REVERB indicator is lit. ROOM: This setting adds a continuous reverb effect to the sound, similar to the acoustic reverberation you would hear in a room. HALL 1: For a "bigger" reverb sound, use the HALL 1 setting. This effect simulates the natural reverberation of a small-size concert hall. HALL 2: For a truly spacious reverb sound, use the HALL 2 setting. This effect simu- lates the natural reverberation of a large concert hall. STAGE: Simulates the reverb of a stage environment. Pressing the [REVERB] button repeatedly toggles the reverb on and off. The indicators light in sequence each time the [REVERB] button is pressed. When all indicators are off, no effect is produced. Adjusting Reverb Depth Adjust the reverb depth for the selected voice by using the [-/NO] [+/YES] buttons while holding the [REVERB] button. Default depth settings are different for each voice. The depth range is from 0 (no effect) through 20 (maximum reverb depth). The current depth setting appears on the display while the [REVERB] button is held. NOTE The default reverb type (including OFF) and depth settings are different for each voice. NOTE Releasing the [REVERB] button changes the reverb type. If you are changing the reverb depth by holding the [REVERB] button, releasing the [REVERB] button will not change the reverb type. 20 P-155 Owner's Manual