Yamaha PCY10 Owner's Manual - Page 4
Specifications, Part Names, Connections, Setting Up - manual
View all Yamaha PCY10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
I Part Names Pad Jack Cable Jack I Setting Up G Using the PCY10 with the PCY60, 80, 65 Series Cymbal Pad (PCY60, 80/80S, 65/65S) PCY10 First, setup the rack system (Yamaha RS Series, etc.) or a cymbal stand (Yamaha CS Series, etc.) then use the supplied wing nut, felt, etc., to attach the cymbal pad as shown in the illustration. Cymbal Support The * denotes parts that are supplied with the PCY10. To keep the PCY10 from rotating, position the Stopper's shaft between the two ribs located on the underside of the PCY10. G Using the PCY10 alone First, setup the rack system (Yamaha RS Series, etc.) or a cymbal stand (Yamaha CS Series, etc.) and attach in the same manner as an acoustic cymbal. PCY10 * Wing Nut * Small Felt * Large Felt PCY60, 80, 65 Series Cymbal Pad Felt Stopper (Supplied with the PCY65S) Wing Nut Felt Felt Cymbal Support G Fastening the Jack 6TFUIFTVQQMJFEDBCMFCBOEUPGBTUFOUIF1$:TKBDLUPUIFSBDLTZTUFNPSDZNCBM TUBOE BTTIPXOJOUIFJMMVTUSBUJPOCFMPX Jack Phone Cable (supplied) Wrap the cable band (supplied) Rack system's pipe, etc. /FWFSBQQMZFYDFTTJWFGPSDF QVMMJOH CFOEJOH FUD POUIF1$:TKBDLBOEDBCMF "MTP OFWFSVTFUIF1$:XIFOJUTKBDLBOEDBCMFBSFOPUSFTUSBJOFE%PJOHTP NBZSFTVMUJOUIFXJSFCSFBLJOH I Connections Use the supplied monaural phone cable to connect the pad's output jack to the DTX Series Drum Trigger Module's Input (9/10, etc.) (DTXPRESS/DTX/DTXTREME). NOTE: When a cable that can combine the input of two monaural sources into a stereo plug is used (optional: Yamaha CO4Y, etc.), individual sounds can be assigned to separate pads (two PCY10s, a PCY10 and a PCY65, etc.) in the DTX Series Drum Trigger Module. (Use the following inputs_ DTXPRESS: 9/10; DTX: 9/10, 11/12; DTXTREME: 9/10-15/16.) Please refer to the Owner's Manual that came with your module for more information. Adjusting the Voice Volume To change the volume of the voice assigned to the PCY10, use the [VOICE] Edit Mode in the DTX Series Drum Trigger Module. Please refer to the Owner's Manual that came with your module for further information. I Specifications Size Weight Sensor System Output Jack Accessories 150mm (dia.) X 27mm (H) (Excluding the jack cable) 330g (Including the jack cable) Trigger Sensor (Piezo) x 1 Standard Monaural Phone Jack Monaural PhoneCable (1.5m) x 1 Attachment Set x1 (Wing Nut, Felt(Large), Felt(Small), Cable Band, 1 each) Owner's Manual (this booklet) x 1 *Improvements may result in a change in the specifications and/or design of the product without notice. SPESIAL MESSAGE SECTION NOTICE: Service charges incurred due to a lack of knowledge relathing to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer's warranty, and are therefore the owners responsibility. Please study this manual carefuly and consult your dealer before requesting service. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Battery Notice: This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. This product may also use "household" type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, do not mix batteries with new, or with batteries of a different type. Batteries MUST be installed correctly. Mismatches or incorrect installation may result in overheating and battery case rupture. Warning: Do not attempt to disassemble, or incinerate any battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by the laws in your area. Note: Check with any retailer of household type batteries in your area for battery disposal information. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly. NAME PLATE LOCATIOIN: The name plate is located on the bottom of the product.The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. Model Purchase Date Serial No. PLEASE KEEP THIS MANUAL Printed in Japan V923790