Yamaha PDS-150 PDS-150 OWNERS MANUAL - Page 3
Assembling the pedestal / Setting-up, Accessories for pedestal assembly, Assembling the pedestal,
View all Yamaha PDS-150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Assembling the pedestal / Setting-up Accessories for pedestal assembly Assembly screw 4 Assembly screw (Black screw) ....4 Pole 2 Base 1 Assembling the pedestal The numbers (such as ) in the explanatory text indicate part numbers in the table of accessories. Assemble the poles correctly by referring to the illustrations below. 1. Installing the poles 2. Securing the poles Base Pole Front Base Pole Pole Pole For 50˝ display(Outside) Insert the poles into the left and right holes in the underside of the base so that they fit securely as shown in the illustration above. Setting-up 1. Setting up the display unit Cloth or similar Display unit Use the assembly screws to secure the poles firmly to the bottom of the base. 2. Securing the display unit Display unit Front Spread a clean cloth or similar material over a level floor or base, and place the display unit on it face down. * Carry out work on a horizontal and level surface. Pole Nameplate Pedestal Rear Use the assembly screws (Black screw) to fasten securely. Lift the display unit above the pedestal base, with the back of the display unit on the same side as the Nameplate. Then align the holes in the display unit with the poles of the pedestal and lower the display unit into place. 3