Yamaha PF-800 PF-800 OWNERS MANUAL - Page 8
Adjiistit, Antiska, Firle.1, Force, He!ght, Adjustment, Stylus, Height, Ust111ent
View all Yamaha PF-800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
PF-E300 ADJIISTit,'G THE ANTISKA-firlE.1 FORCE Align the scale marking on the anti-skating knob which corresponds to the rated tracking force of your cartrige with the index mark. Adjustment of anti-skating force Index mark ANTI-SKATING knob Scale HE!GHT ADJUSTMENT (1) Set a record on the turntable platter, and press the cueing switch to lower the stylus tip to the record. (2) Loosen the tonearm height adjustment screw with an Allen wrench, slowly raise and lower the tonearm, and adjust so the tonearm is parallel to the record as shown in the diagram. (3) When the tonearm is level (parallel with the record), tighten the tonearm height adjustment screw to secure it in place. STYLUS HEIGHT AO.. UST111ENT When the tonearm is in the up position, the height of the stylus above the record should be 6 mm. If it is more or less than this, turn the adjustment screw so the distance from the stylus to the record is 6 mm. Adjustment screw O Loosen.ip Tight Stylu down Arm lifter C) Stylus up Cartridge N rL? 6 mm 01 Headshell Record Fig. 7 Fig. 8 Fig. 9 7