Yamaha PGX1 PGM1/PGX1 Installation Manual - Page 15
switch does not support PoE, connect a PoE injector between the network switch, and the PGM1.
View all Yamaha PGX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting the PGM1 to an MTX/MRX system 1. Use the rotary switch and DIP switches of each unit to specify its UNIT ID. 2. Connect a PoE network switch that can work with Dante within the Dante network, and use an Ethernet cable to connect the PGM1 to the network switch. If the network switch does not support PoE, connect a PoE injector between the network switch and the PGM1. In some cases, the PSE (PoE network switch or PoE injector) might have ports that supply power and ports that do not supply power. Connect the PGM1 to a port that supplies power. For details on how to synchronize each device, refer to "MTX-MRX Editor User Guide." 3. With the PGM1 and the PSE connected, power-on the PSE. Connections for a small system Maximum 100 meters Computer MRX7-D PoE injector PGM1 Connections for a large system PGM1 PGM1 PGM1 PGM1 MRX7-D Maximum 100 meters SWR2100P-10G SWP1-16MMF XMV8280-D Computer PGM1/PGX1 Installation Manual 15