Yamaha PM-6 Owners Manual - Page 7
Quick Guide
View all Yamaha PM-6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
QUICK GUIDE Attaching and removing the Pickup Mute™ PM9/PM7/ PM6/PM5/PM3 ■ Attach the Pickup Mute™ PM1 to the Tuba As shown in the illustration, hold the instrument with your left hand and, while turning the Pickup Mute™, firmly insert it into the bell with your right hand. Attaching the Pickup Mute™ to the Euphonium For Euphoniums, with the bell facing up, hold the PM2 by its handle in your right hand and firmly insert it into the bell. 16 1. After assembling the PM1 (refer to pg. 15) lay it on its side. While seated, hold the tuba between your legs. Hold the PM1 by its handle and lift it up. 2. Holding the PM1 with both hands, gently insert the Inner Head into the bell of the tuba. (Continue holding the tuba between your legs.) 3. Adjust the PM1 so that it is posi- tioned in the center of the bell. * Noise will result if the Inner Head is touching the bell. After removing the PM1 from the instrument, lay the PM1 on its side. If the PM1 is stood vertically, the Inner Head will collapse causing a burst of noise in the earphones that may result in hearing impairments. 4. Attach the PM1 fixing hooks to the bell. If necessary, adjust the length (tension) of the hook belt. 5. Connect the lock nut equipped end of the supplied cable to the PM1's output jack and secure the lock nut. When putting the PM1 away, hold the Inner Head with both hands and gently collapse it back into the Body. Strongly dropping the Inner Head may result in damage to the PM1.