Yamaha PSR-225GM Owner's Manual - Page 115
<MIDI Master Tuning> F0H, 43H, 1nH, 27H, 30H, 00H, mm, ll, cc, F7H, <DSP Type> F0H, 4CH - psr 225 gm midi
View all Yamaha PSR-225GM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
NOTE: *1 By default (factory settings) the PSR-225 ordinarily functions as a 16channel multi-timbral tone generator, and incoming data does not affect the panel voices or panel settings. However, the MIDI messages listed below do affect the panel voices, auto accompaniment, and songs. • MIDI Master Tuning • System exclusive messages for changing the Reverb Type, Chorus Type, and DSP Type. The Remote Channel can be designated by using Function parameter #81. The messages received over the set channel are handled in the same way as key data received from the PSR-225 itself. The following messages can be received over the designated channel set in this Function parameter; all other messages will be ignored. • Note ON • Note OFF • Control change : Bank select MSB, LSB (Main Voice Only), Modulation, Volume, Expression, Sustain, All sound off, All note off • Program Change (Main Voice Only) • Pitch Bend *2 Messages for these control change numbers cannot be transmitted from the PSR-225 itself. However, they may be transmitted when playing the accompaniment or using the Harmony effect. *3 Exclusive F0H, 7EH, 7FH, 09H, 01H, F7H • This message automatically restores all default settings for the instrument, with the exception of MIDI Master Tuning. F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H • This message allows the volume of all channels to be changed simulta- neously (Universal System Exclusive). • The values of "mm" is used for MIDI Master Tuning. (Values for "ll" are ignored.) F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mm, ll, cc, F7H • This message simultaneously changes the tuning value of all channels. • The values of "mm" and "ll" are used for MIDI Master Tuning. • The default value of "mm" and "ll" are 08H and 00H, respectively. Any values can be used for "n" and "cc." • This is used for saving (recording) User data (User songs, User One Touch Setting, and EZ Chord). (Receive Only) F0H, 43H, 73H, 01H, 02H, F7H (Internal Clock) F0H, 43H, 73H, 01H, 03H, F7H (External Clock) • These messages control the clock setting for the accompaniment. F0H, 43H, 1nH, 4CH, 02H, 01H, 00H, mmH, llH, F7H • mm : Reverb Type MSB • ll : Reverb Type LSB Refer to the Effect Map (page 116) for details. F0H, 43H, 1nH, 4CH, 02H, 01H, 20H, mmH, llH, F7H • mm : Chorus Type MSB • ll : Chorus Type LSB Refer to the Effect Map (page 116) for details. F0H, 43H, 1nH, 4CH, 02H, 01H, 40H, mmH, llH, F7H • mm : DSP Type MSB • ll : DSP Type LSB Refer to the Effect Map (page 116) for details. F0H, 43H, 1nH, 4CH, 08H, 0mH, 11H, llH, F7H • ll : Dry Level • 0m : Channel Number *4 It is possible to switch between External and Internal Clock. *5 When the accompaniment is started, an FAH message is transmitted. When accompaniment is stopped, an FCH message is transmitted. When the clock is set to External, both FAH (accompaniment start) and FCH (accompaniment stop) are recognized. No MIDI messages can be received or transmitted in the Song mode. MIDI IMPLEMENTATION CHART 115