Yamaha PSR-I300 PSR-I300 Owners Manual - Page 13

Setting Up Setting Up NOTE • This instrument cannot charge the batteries. Use only the specified charger device when charging. • Power will be automatically drawn from the AC adaptor if an AC adaptor is connected while batteries are installed in the instrument.  Setting the battery type Depending on the battery to be installed, you may need to change the battery type setting, although "Alkaline (and manganese)" is set by default. After installing new batteries, call up Function number 063 (page 57), and then set the Battery Type (rechargeable or not). NOTICE • Failure to set the battery type may shorten the amount of the battery life. Make sure to set the battery type correctly. Turning the Power On 1 Turn down the [MASTER VOLUME] dial to "MIN." Setting the Auto Power Off function To prevent unnecessary power consumption, this instrument turns off automatically if not operated for 30 minutes by default. This non-operation time can be changed as desired.  To change the non-operation time which enables Auto Power Off Press the [FUNCTION] button several times until "AutoOff" (Function 062; page 57) appears, and then use the [+/YES] or [-/NO] button to select the desired value. Settings: OFF, 5, 10, 15, 30, 60, 120 (minutes) Default value: 30 (minutes)  To cancel Auto Power Off when turning on the instrument Turn the power on while holding down the lowest key on the keyboard. A message "oFF AutoOff" appears briefly, then the instrument starts up with the Auto Power Off function disabled. 2 Press the [ ] (Standby/On) switch to turn the power on. The Voice name appears on the display. Adjust the volume as desired while playing the keyboard. 3 Press and hold the [ ] (Standby/On) switch for about a second to set the instrument to standby mode. CAUTION • Even when the [ ] (Standby/On) switch is in standby sta- tus, electricity is still flowing to the product at the minimum level. Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms. NOTICE • Press only the [ ] (Standby/On) switch when turning the power on. Any other operations such as pressing the pedal are not allowed. Doing so may cause the instrument to malfunction. The lowest key NOTICE • Depending on the instrument status, the power may not turn off automatically, even after the elapse of the specified period of time. Always turn off the power manually when the instrument is not in use. • When the instrument is not operated for a specified time while connected to an external device such as an amplifier, speaker or computer, make sure to turn off all connected devices including the instrument, in order to protect the devices from possible damage from power turning off automatically. Alternately, if you want to avoid doing this, simply disable the Auto Power Off function. NOTE • Generally, the data and settings are maintained even when the power is turned off with the Auto Power Off function. For details, see page 53. PSR-I300 Owner's Manual 13