Yamaha PSRD1-DJX Owners Manual - Page 97
USING BULK DUMP SEND/SAMPLING SEND TO SAVE DATA, Saving Bulk Data/Sampling Data, BulkSnd?, SmplSnd? - owner s manual
View all Yamaha PSRD1-DJX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
MIDI FUNCTIONS UUSSIINNGG BBUULLKK DDUUMMPP SSEENNDD//SSAAMMPPLLIINNGG SSEENNDD TTOO SSAAVVEE DDAATTAA The actual operation steps for these two functions are identical. The Bulk Dump Send function saves User Performance Setup and User Song. The Sampling Send function saves only user-sampled data ("Sampled" voice, #284). Saving Bulk Data/Sampling Data 1 First, set up the connected MIDI device for re- cording the data. The actual procedure may differ depending on your particular equipment and software. For example, if you are using the Yamaha MDF3 MIDI Data Filer: 1) Make the appropriate MIDI connections. DJX MIDI OUT MIDI IN MDF3 2) Set up the MDF3 for recording MIDI data. (Refer to the MDF3 Owner's Manual.) 2 On the DJX, select the Bulk Dump Send/Sam- pling Send function. Do this in the normal way: 1) Press the FUNCTION button. 2) Select the desired Function parameter with the numeric keypad: #86 for Bulk Dump Send, or #88 for Sampling Send. STYLE F86BulkSend FUNCTION STYLE F88SmplSend FUNCTION STYLE YESBulkSnd? FUNCTION STYLE YESSmplSnd? FUNCTION 3 At the "BulkSnd?"/"SmplSnd?" prompt above, set the operation to standby. Press the + button to start the operation. The Bulk Dump Send/ Sampling Send functions cannot be used in the following conditions: • While playing a pattern • In the Song mode • In one of the Recording modes • While calling up a Performance Setup • While receiving bulk/ sampling data If you attempt the function while in one of the above conditions, "- - -" appears in the display and the data is not transmitted. 97