Yamaha PX-2 PX-2 OWNERS MANUAL - Page 12

PX - 2, SPECIFICATIONS When play is to be started midway in disc 1. Move the tonearm to the desired position, using the LEFTWARD FEED switch. This will cause the platter to start rotating. 2. Depress the DOWN switch to lower the tonearm to start disc play. 3. On completion of disc play, operations will be completed, following AUTO-RETURN of tonearm. * REPEAT play is not possible when play has been started with manual operation. /. 11 up ►/ DOWN Fig. 17 When disc play is to be discontinued midway in play Depress the CUT switch. Play will be discontinued at that position. Following AUTO-RETURN of tonearm, operation will be completed. * To protect the cartridge should power supply be discontinued because of service interruption during disc play, or should the power switch be switched off by mistake, the unit has been designed so that the tonearm will stop in an uplifted position. When power supply has been restored, start operation again. TONEARM SECTION Arm type Linear tracking arm Servo system Photo-electric tracking sensor plus servo motor Total length Effective length Tracking force device 236 mm (9-9/32") 190mm (7-15/32") Static balance type sliding weight system 0 - 2.5 g, in 0.1 g steps Effective mass Proportional type to tracking force (In cartridge-less state) 1.0 g (Tracking force) 16.5 g 1.5 g (Tracking force) 17.0 g 2.0 g (Tracking force) 17.5 g Applicable cartridge weight range 5 - 11 g (Using sub-weights I 10 -169 Maximum horizontal tracking error angle ±0.15° At stylus tip ±- 0.5 mm Arm lifter Oil damp type cueing Adjustable range of arm height ±4.0 mm Head shell Pure, forged aluminum, Weight: 8.0 g Plug-in type conforming to E IA Standards PU Cable N EG LEX 2496 Low-impedance, double cylindrical cord Capacitance: 130pF Resistance: 1 52 Cartridge (Not provided) Replaceable ROTARY SECTION Motor DC, 4-phase, 8-pole coreless Hall motor Starting torque 1 kg-cm, or more Drive system Direct drive Servo system Quartz PLL, Negative/positive two-direction servo Locking torque 450 g.cm F.G. Total circumference integrating type Speed (With Lock Indicator) 33-1/3 r.p.m., 45 r.p.m. Platter 31 cm (12-1/4") diameter, aluminum die-cast Weight: 2.1 kg (4.62 lbs) (Including rubber mat) Moment of inertia 270 kg-cm2 (Including rubber mat) EXTERNAL DESIGN Cabinet Dust cover Hinges Insulator Aluminum, die-cast, 5mm thick black enamel coating Acrylic, 5mm thick, weighing 1.3kg Front operating type. Free stop, detachable type Combination of spring-and -rubber type with height adjustment CONTROL SECTION Automatic functions Size selector Manual functions Speed Others AUTO-LEAD-IN AUTO-RETURN REPEAT AUTO-UP (During Power-OFF) 17/25/30 cm (7"/10"/12") ARM -UP ARM-DOWN LEFTWARD & RIGHTWARD 2-speed feeding CUT 33-1/3 r.p.m. and 45 r.p.m. Power switch GENERAL S/N ratio 80dB (IEC 98A Weighted) Wow and flutter 0.01% WRMS (FG direct) Power supply and consumption U.S.A & Canadian Models 120V AC, 60Hz ... 25W European Mod el 220V AC, 50Hz ... 25W Australian & British Models 240V AC, 50Hz ... 25W General Model 110/120/130/220/230/240V AC, 50/60Hz ... 22W Dimensions (W x H x D) mm 493 x 156 x 428 (19-7/16") x (6.5/32") x (16-27/32") Total weight 17 kg (37.4 Ib) Specifications are subject to change without notice. 11