Yamaha QL5 Ql Editor Installation Guide - Page 6

Network Settings When you connect the computer to the QL through a dedicated network • Settings of the QL You can use the following initial settings. IP address Subnet mask Gateway address 192.168.0.128 255.255.255.0 192.168.0.1 • Settings of the computer We recommend that you make the following settings. IP address Subnet mask Default gateway (Router) 192.168.0.100 255.255.255.0 192.168.0.1 When you connect the computer to the QL in the existing network Make the network settings of the QL and your computer in accordance with your LAN. Please contact your network administrator for further details. For specific instructions and caution for connecting the QL to LAN, please refer to the following web site: http://www.yamahaproaudio.com/ • Settings of the QL IP address Gateway address Subnet mask Set the IP address so that it does not conflict with the IP address of any other device on the network. Set the IP address of the gateway when the gateway exists. Set the vacant address when the gateway does not exist. The address should be set in the same subnet as IP address within LAN in which the subnet is set. Set the subnet mask of the subnet connected to the QL. QL Editor Installation Guide 6