Yamaha QY100 Data Filer - Page 10
How to start the QY100 Data Filer - sequencer
UPC - 086792626192
View all Yamaha QY100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
How to start the QY100 Data Filer Z Start the QY100 Data Filer. After installation (refer to page 5) and connection (refer to the "QY100 Owner's Manual") are completed, follow the instructions below to start up the QY100 Data Filer. • If you are using Window95/98/NT4.0/2000/Me Click the "START" button, then click "QY100 Data Filer", which is located in the "YAMAHA QY100 Data Filer" under the Programs menu. • If you are using a Macintosh Double click the "QY100 Data Filer" icon. s NOTE • If you use the QY100 Data Filer on a Macintosh System, open the "Chooser" in the "Apple Menu" and turn off "Apple Talk". s CAUTION • If the MIDI Driver cannot be used with your computer, the following message will be displayed. "The selected MIDI device is in use. Quit any applications using the device." → Click "OK", then quit all other MIDI applications (sequencer software, etc.) that use the MIDI driver, and start the QY100 Data Filer once again. "Can't find the MIDI device. Confirm the MIDI device settings." → The MIDI driver is not properly installed. Refer to page 6/7. s CAUTION • If the QY100 is not properly connected to your computer, "Data transfer failed. Confirm QY100 connections (HOST SELECT switch, etc.)" dialog box will be displayed. Properly connect the QY100, confirm the HOST SELECT switch position, and start the software again. 10