Yamaha R-S700 Owners Manual - Page 45
ADVANCED, OPERATION, Volume, Zone2 Volume R-S700 only, Trigger Out R-S700 only - test
UPC - 027108936871
View all Yamaha R-S700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Details of the menu items are as follows. The configuration will be reflected to the input source currently selected. y The default settings are marked with "*". Volume Submenus: Adjustable range (MaxVol): Adjustable range (IniVol): MaxVol, IniVol -30.0dB to +15.0dB, +16.5dB* (5.0 dB step) Off*, Mute, -89.5dB to +16.5dB (0.5 dB step) Sets items for volumes. MaxVol (Maximum volume) Sets the maximum volume level so that the volume will not be accidentally increased above a certain level. For example, you can adjust the volume between -89.5 dB and -5.0 dB (or Mute) when you set this parameter to "-5.0dB". The volume can be increased to the maximum level when this parameter is set to +16.5 dB (default). IniVol (Initial volume) Sets the volume at the time this unit is turned on. When this parameter is set to "Off", the volume level used when this unit was set to standby is applied. Note If "MaxVol" is set to a value lower than the "IniVol" setting, the setting for "MaxVol" overrides the "IniVol" setting. For example, if you set "MaxVol" to "-30.0dB" and "IniVol" to "0.0dB", the volume is automatically set to "-30.0dB" the next time this unit is turned on. Zone2 Volume (R-S700 only) Submenus: Adjustable range (MaxVol): Adjustable range (IniVol): MaxVol, IniVol -30.0dB to +15.0dB, +16.5dB* (5.0 dB step) Off*, Mute, -89.5dB to +16.5dB (0.5 dB step) Sets the maximum volume level and initial volume level of Zone 2. MaxVol (Maximum volume) Sets the maximum volume level for Zone 2. Refer to "MaxVol (Maximum volume)" above. IniVol (Initial volume) Sets the volume at the time Zone 2 is turned on. Refer to "IniVol (Initial volume)" above. y The "ZONE 2" indicator on the front panel display flashes when the Zone2 volume is adjusted. SETTING THE OPTION MENU FOR EACH INPUT SOURCE Note If "MaxVol" is set to a value lower than the "IniVol" setting, the setting for "MaxVol" overrides the "IniVol" setting. For example, if you set "MaxVol" to "-30.0dB" and "IniVol" to "0.0dB", the volume is automatically set to "-30.0dB" the next time this unit is turned on. Trigger Out (R-S700 only) Submenu: Choices: Mode Power*, Source, Manual Use this feature to select the functions of the TRIGGER OUT jack of this unit. Power Select this setting to send the voltage signals while the selected zone is turned on. Source Select this setting to send the voltage signals while the input source is selected. Manual Select this setting to send the voltage signals manually. Note The settings that are available depend on the mode (Power, Source, or Manual) that is selected. Power: Zone Source: Zone and Output level for each input source Manual: Manual test Zone Choices: All*, Main, Zone 2 Select the zone to apply the setting you selected in "Mode". All The "Mode" setting is applied to the Main zone and Zone 2. Main The "Mode" setting is applied to the Main zone only. Zone 2 The "Mode" setting is applied to Zone 2 only. ADVANCED OPERATION 41 En