Yamaha R-V98 Owner's Manual - Page 13

OPERATIONS 3 2 1, 6 4 TO PLAY A SOURCE 1 VOLUME 7 5 Play the source. (For detailed information on the tuning operation, refer to the page 16.) 0 - dB Set to the " ∞ " position. 2 POWER 3 Select the desired input source by using the input selector switches. (For video sources, turn the TV/monitor ON.) MONITOR VCR TAPE LD/TV INPUT TUNER CD PHONO COPY * The name of the selected input source will appear in the display. 4 Select the front speakers to be used. SPEAKERS A B ON ON OFF OFF * If you use two front speaker systems, press both the A and B switches. 6 VOLUME 0 - dB Adjust to the desired output level. 7 If desired, adjust the BASS, TREBLE, BALANCE controls, etc. (refer to the page 15) and use the digital sound field processor. (Refer to the page 20.) Note In step 3, if two or more program sources are selected at the same time (by using the input selector switches), be sure to remember the priority order of the input sources. Priority order of sources: 1) TAPE, 2) VCR, 3) LD/TV, TUNER, CD or PHONO. q If you select LD/TV, TUNER, CD or PHONO, be sure that neither TAPE nor VCR have been selected. q If you select TAPE and VCR and another input selector switch at the same time, the playback result will be the video image from the VCR and the sound from the audio tape. q If you select both LD/TV and TAPE at the same time, the playback result will be the video image from the LD player and the sound from the audio tape. q Once you play the LD player, its video image will not be interrupted even if other input selector switches except VCR are selected. q For TAPE and VCR, whenever the switch is pressed, the corresponding input source is selected or canceled alternately. 13