Yamaha RX-396RDS Owner's Manual - Page 13

English DISPLAY PANEL 1 23 4 AUTO STEREO MHz 0 20 l00 TAPE MON MEMO PS PTY RT CT PTY HOLD EON NEWS INFO AFFAIRS SPORT SLEEP 2 5 6 : RX-496RDS and RX-396RDS only 78 9 0 A 1 Multi-information display Displays various information, for example station frequency, preset station number and name of selected input source. 2 AUTO indicator Lights up when this unit is in the automatic tuning mode. 3 STEREO indicator Lights up when an FM stereo broadcast with sufficient signal strength is received. 4 Signal-level meter Indicates the signal level of the received station. If multipath interference is detected, the indication decreases. 5 MEMO indicator When the MEMORY button is pressed, this indicator flashes for about 5 seconds. While this indicator is flashing, the displayed station can be programmed to the memory by using the A/B/C/D/E button and the preset station number selector buttons. 6 RDS mode indicators RRXX--449966RaDnSd aRnXd-3R9X6-R3D96SRoDnSlyonly The name(s) of RDS mode(s) employed by the currently received RDS station light(s) up. Illumination of the indicator on the head of a name shows that the corresponding RDS mode is now selected. 7 PTY HOLD indicator RX-496RDS and RX-396RDS only Lights up while the search is performed in the PTY SEEK mode. 8 EON indicator RX-496RDS and RX-396RDS only Lights up when an RDS station that employs the EON data service is received. 9 Program type name indicators RX-496RDS and RX-396RDS only The name selected in the EON mode lights up. 0 SLEEP indicator Lights up while the built-in SLEEP timer is functioning. A TAPE MON 2 indicator Lights up when the tape deck (or MD recorder etc.) connected to the TAPE 2 terminals on the rear of this unit is selected as the input source by pressing the TAPE 2 MONITOR button. 13