Yamaha RX-A1080 RX-A1080 Owner s Manual - Page 142
Updating the unit’s firmware via the network, Updating the unit’s firmware, the front display
View all Yamaha RX-A1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
SLEEP PARTY MAIN ZONE 2 PURE DIRECT HDMI OUT SCENE 1234 5678 INPUT TUNER NET USB BLUETOOTH PRESET RED GREEN YELLOW BLUE SETUP Cursor keys ENTER TOP MENU HOME POP-UP /MENU AI PROGRAM SUR. DECODE VOLUME ENHANCER STRAIGHT MEMORY TUNING BAND TUNING Updating the unit's firmware via the network New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. Note • Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20 minutes or more (depending on your Internet connection speed). • If the unit is connected to the wireless network, network update may not be possible depending on the condition of the wireless connection. In this case, update the firmware using the USB memory device (p.141). • For details on update, visit the Yamaha website. X • The firmware update indicator (p.12) on the front display lights up when a firmware update is available via the network. • You can also update the firmware using the USB memory device from the "ADVANCED SETUP" menu (p.141). • You can also start the firmware update by pressing INFO on the front panel. A firmware update is available if the following message is displayed after SETUP is pressed. Updating the unit's firmware 1 Read the on-screen description. 2 Use the cursor keys to select "START" and press ENTER. The on-screen display turns off and the firmware update begins. 3 If "UPDATE SUCCESS PLEASE POWER OFF!" appears on the front display, press MAIN ZONE z on the front panel. The firmware update is complete. X • If you want to cancel without doing anything now, select "CLOSE". • Firmware update takes about 20 minutes or more. • You might not get the message or the lighting up firmware update indicator on the front display depending on the condition of the network connection. In this case, update the firmware using the USB memory device (p.141). • For details on update, visit the Yamaha website. • To perform the update when turning off the unit, select "LATER" in step 2, and then follow the on-screen instructions. When a screen to confirm the firmware update appears after turning off the unit, press ENTER to start the firmware update. When the firmware update is complete, the unit enters standby mode automatically. • To perform the update when turning off the unit, refer to the following instructions. - The firmware update can be started by pressing INFO on the front panel. - The unit turns off automatically without performing the firmware update if two minutes pass after the screen to confirm the firmware update is displayed. - To cancel the firmware update process, press RETURN, and the unit will turn off. - The unit turns off without performing the firmware update if you turn off the unit with AV CONTROLLER or MusicCast CONTROLLER. En 142