Yamaha RX-A3040 RX-A3040/RX-A2040 Owners Manual - Page 128
Test Tone, Manual equalizer adjustment
View all Yamaha RX-A3040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
■ Manual equalizer adjustment 1 Set "Parametric EQ" to "Manual" and press ENTER. 2 Press ENTER again to enter the edit screen. 3 Use the cursor keys to select a speaker and press ENTER. • To restore the default settings for all speakers, select "PEQ Data Clear" and then "OK". • To copy the parametric equalizer values acquired with "Auto Setup" (p.47) to the "Manual" fields for fine adjustment, select "PEQ Data Copy" and then an equalizer type. 4 Use the cursor keys (e/r) to select a center frequency from the 7 preset bands (4 for subwoofer) and the cursor keys (q/w) to adjust the gain. ■ Test Tone Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect. Settings Off Does not output test tones. On Outputs test tones automatically when you adjust the speaker balance or equalizer. Setting range Gain: -20.0 dB to +6.0 dB 5 To fine-adjust the center frequency or Q factor (bandwidth), press ENTER repeatedly to select an item. Frequency: Use the cursor keys (e/r) to adjust the center frequency of the selected band and the cursor keys (q/w) to adjust the gain. Q: Use the cursor keys (e/r) to adjust the Q factor (bandwidth) of the selected band and the cursor keys (q/w) to adjust the gain. Setting range Center frequency: 31.3 Hz to 16.0 kHz (31.3 Hz to 250.0 Hz for subwoofer) Q factor: 0.500 to 10.080 6 To exit from the menu, press ON SCREEN. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 128