Yamaha RX-A720 Quick Guide - Page 2

■ Connections Caution • Before connecting the speakers, remove the unit's power cable from the AC wall outlet. • Ensure that the core wires of the speaker cable do not touch each other or come into contact with the unit's metal areas. This may damage the unit or the speakers. • Connect the speakers with the correct polarity. 1 Connect the speaker in Zone2 to the EXTRA SP terminals with speaker cables. The type of the speaker terminals varies depending on the model. The unit (rear) EXTRA SP terminals ZONE 2/PRESENCE EXTRA SP 2 Connect the playback devices (such as BD/DVD players and CD players) in the main zone to the analog stereo input jacks with stereo pin cables. Only analog audio sources (including FM/AM radio), and USB and network sources can be output to Zone2. To listen to the playback of an external device in Zone2, you need to connect the device to the analog audio input jacks. The unit (rear) AV 5-6 jacks AUDIO 1-2 jacks L L R R L L R R AUDIO OUT BD/DVD player CD player 3 Connect the power cable to an AC wall outlet. To operate the unit and external devices from Zone2 You can operate the unit and external devices from Zone2 using the supplied remote control if you connect an infrared signal receiver/emitter to the unit's REMOTE IN/OUT jacks. For details, refer to the Owner's Manual in the supplied CD-ROM. Left Right Speakers (Zone2) (Rotate-type) + (red) c bZONE 2/PRESENCE - (black) da (Push-type) a d EEX2T/PRRAESSPENCE b + (red) c - (black) 2