Yamaha RX-E600 Owner's Manual - Page 16

USING THE BUILT-IN TIMER Before using the timer If you want to use the cassette deck, KX-E300 or the MD Recorder, MDX-E300 for timer play or recording, you must first make the connections as shown in "Connecting the system" on page 5. For details, refer to the instructions supplied with the MDX-E300 or KX-E300. 3. Timer REC Select the recording component by turning INPUT. If you wish to enjoy timer playback with the TUNER or AUX settings, select "REC Mode OFF". (Example) Timer play and recording By using the built-in timer, you can have the unit turn on at a specified time and begin playing or recording automatically. You can also specify the time at which you want the unit to turn off. DISPLAY HOUR MIN 4. ON Time "ON Time" appears on the display for a second, and changed to the time setting mode. Press HOUR to set the hour. Press MIN to set the minute. STANDBY/ON TIMER PHONES NATURAL SOUND STEREO RECEIVER RX-E600 VOLUME DISPLAY MEMORY AUTO/MAN'L PRESET/BAND TIMER ADJ BASS TIMER TREBLE PRESET/TUNING HOUR MIN BALANCE - + - + L R MIN MAX INPUT TIMER INPUT 1 Press DISPLAY. Whenever DISPLAY is pressed, the display mode changes as follows: 1. Clock Time (TIMER on/off mode) If you have not set the clock yet "Set Clock" appears. You need to set the current time as described on page 6. 2. Timer Input Select the source to be played by turning INPUT. • Timer recording is possible only when you select TUNER or AUX. 5. OFF Time Set the time the same way as above. If you set the ON time but not OFF time, timer play or recording will finish automatically after an hour. Notes • The display mode changes after approximately 8 seconds. If you change the mode before completing setting, press DISPLAY once or more to return to the desired mode. • If you select the input other than TUNER and AUX on "2. Timer Input", "3. Timer REC" is skipped. 2 Press TIMER to complete the timer setting. The system changes to the standby mode. • TIMER indicator lights up. If you continue using the system, press STANDBY/ ON to turn on this unit. To cancel the timer play setting Press DISPLAY to show the current time, then press TIMER so that "TIMER" disappears from the display. You can also cancel the timer play setting by pressing TIMER when the unit is in standby mode. Note • In the event of a power failure or when the AC power cord is disconnected for more than five minutes, you must reset the clock. 12