Yamaha RX-V1500 Owner's Manual - Page 66

p p SET MENU ■ Multi Channel Input D)MULTI CH INPUT Use this feature to set the direction of the signals input into the center, subwoofer and surround channels when a source component is connected to the MULTI CH INPUT jacks. If you are inputting 8-channel signals from an external decoder, use this feature to select jacks for the additional front signals. D)MULTI CH INPUT . [6CH 8CH (FRNT/SB-> FRNT) CENTER ->CENTER SWFR -> SWFR SL/SR -> SL/SR ( --- -> SB ) : Select / : Up/Down 6ch/8ch This setting is used to select the number of channels input from an external decoder. Choices: 6ch, 8ch Note If ZONE2 AMP (page 64) is set to "ON", no sound is output from the surround back speakers even if you select "8ch". In this case select "6ch" and set the output setting of the external decoder to 6 channels. FRNT If you selected "8ch", you can select analog audio jacks to which front signals from an external decoder will be input. Choices: DVD, DTV, CBL/SAT, VCR 1, DVR/VCR 2, MD/TAPE, CD-R, CD, V-AUX CENTER Use to select where the signals input to the CENTER jack will be output. Choices: CENTER, FRONT • Select "CENTER" to output the signals from the center speaker. • Select "FRONT" to output the signals from the front left and right speakers. SWFR Use to select where the signals input to the SUBWOOFER jack will be output. Choices: SWFR, FRONT • Select "SWFR" to output the signals from the subwoofer. • Select "FRONT" to output the signals from the front left and right speakers. SL/SR Use to select where the signals input to the SURROUND jacks will be output. Choices: SL/SR, FRONT • Select "SL/SR" to output the signals from the surround speakers. • Select "FRONT" to output the signals from the front left and right speakers. p p p p Using OPTION MENU 4 OPTION MENU1/2 . A)DISPLAY SET B)MEMORY GUARD C)PARAM. INI D)SP IMP. SET / : Up/Down : Enter ■ Display set A)DISPLAY SET A)DISPLAY SET . DIMMER;;;;;;;;;0 OSD SHIFT;;;;;;0 GRAY BACK;;;AUTO V CONV.;;;;;;;ON CMPNT OSD;;;;;ON / : Up/Down : Select Dimmer DIMMER Use to adjust the brightness of the front panel display. Choices: -4 to 0 OSD shift OSD SHIFT Use to adjust the vertical position of the OSD. Choices: +5 (downward) to -5 (upward) • Press h to lower the position of the OSD. • Press l to raise the position of the OSD. Gray back GRAY BACK Selecting "AUTO" for the on-screen display setting displays a gray background when there's no video signal input. If "OFF" is selected, information can only be displayed on the screen when a video signal is being input. Choices: AUTO, OFF Note If GRAY BACK is set to "OFF", information cannot be displayed when only component signals are being input. 62