Yamaha RX-V373 RX-V373 Owners Manual - Page 62
ECO, Adjustment, Dynamic Range, Max Volume, Initial Volume
View all Yamaha RX-V373 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
❑ Adjustment Adjusts the delay between video and audio output manually when "Select" is set to "Manual". You can fine-adjust the audio output timing when "Select" is set to "Auto". Setting range 0 ms to 250 ms (1 ms increments) Default 0 ms ■ Volume Configures the volume settings. ❑ Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. Settings Maximum (default) Standard Min/Auto Produces audio without adjusting the dynamic range. Optimizes the dynamic range for regular home use. Sets the dynamic range for clear sound even at night or at low volumes. When playing back Dolby TrueHD signals, the dynamic range is automatically adjusted based on the input signal information. ❑ Max Volume Sets the maximum volume to prevent excessive loudness. Setting range -30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB Default +16.5 dB ❑ Initial Volume Sets the initial volume when the receiver is turned on. Settings Off (default) Sets the level to the volume level of the unit when it last entered standby mode. Mute Sets the unit to mute the audio output. -80.0 dB to +16.5 dB (0.5 dB increments) Sets the level to the specified volume level. ECO Configures the power supply settings. Setup Speaker HDMI Sound ECO Function Language Auto Power Down ECO Mode ■ Auto Power Down Sets the amount of time for the auto-standby function. If you do not operate the unit for the specified time, the unit will automatically go into standby mode. Settings Off 2 hours, 4 hours, 8 hours, 12 hours Does not set the unit to standby mode automatically. Sets the unit to standby mode when you have not operated the unit for the specified time. For example, when "2 hours" is selected, the unit will switch to standby mode if you do not operate it for 2 hours. Default U.K. and Europe models: 8 hours Other models: Off • Just before the unit enters standby mode, "AutoPowerDown" appears and then countdown starts in the front display. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 62