Yamaha RX-V3800 Owner's Manual - Page 44
Reviewing the result of the automatic, setup, Wiring Speaker wiring
UPC - 027108928524
View all Yamaha RX-V3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Optimizing the speaker setting for your listening room (YPAO) 6 Once you have selected the desired settings of each parameter, press 4l to return to the previous menu level and then press 4n to select "Start". 7 After the setting of the measurement, start the automatic setup procedure. Refer to steps 4 to 6 of "Basic procedure of the automatic setup" on page 37 for details. System Memory feature You can save multiple result of the automatic setup by using the System Memory feature. See page 100 for details. ■ Reviewing the result of the automatic setup Use this feature to review the result of the automatic setup. 1 Set the operation mode selector to DAMP and then press GSET MENU to turn on the GUI screen. 2 Press 4k / n repeatedly and then 4h to select "Auto Setup". Input Select Manual Setup Auto Setup System Memory Signal Info. Information Setup Menu Start 3 Press 4k to select "Information". Information Setup Menu Start Wiring Distance Size 4 Press 4h and then 4n repeatedly to select the desired check items. Wiring Distance Size Left Right Front NRM NRM Center NRM Sur. NRM NRM S.Back NRM NRM PRNS NRM NRM SubWfr NRM Reload:ENTER Wiring (Speaker wiring) Displays the polarity of each connected speaker. • "NRM" appears when the polarity of the connected speaker is normal. • "REV" appears when the polarity of the connected speaker is reversed. Note "---" appears when no speaker is connected to the corresponding speaker channel. Distance (Speaker distance) Displays the speaker distance from the listening position. Press 4l / h to switch the unit to display the value of the each speaker distance. Note "---" appears when no speaker is connected to the corresponding speaker channel. Size (Speaker size) Displays the size of the connected speakers. The bass cross over frequency ("Cross") appears at the bottom of the menu area. • "LRG" appears when the connected speaker has the ability to reproduce the low-frequency signals effectively. • "SML" appears when the connected speaker does not have the ability to reproduce the low-frequency signals effectively. Note "---" appears when no speaker is connected to the corresponding speaker channel. Equalizing (Speaker equalizing) Displays the result of the adjustment of the frequency responses of each connected speaker. Note "---" appears when no speaker is connected to the corresponding speaker channel. Level (speaker level) Displays the speaker output level of the connected speakers. Note "---" appears when no speaker is connected to the corresponding speaker channel. 40 En