Yamaha RX-V385 RX-V385/HTR-3072 Quick Start Guide - Page 23

Problem, Cause, Remedy, No video from the playback device

Get Yamaha RX-V385 PDF manuals and user guides View all Yamaha RX-V385 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Problem No sound is coming from a specific speaker. No sound is coming from the subwoofer. No video. No video from the playback device connected to the unit with HDMI. Cause The playback source does not contain a signal for the channel. The currently selected sound program/decoder does not use the speaker. Audio output of the speaker is disabled. The playback source does not contain LFE or lowfrequency signals. Subwoofer output is disabled. Another input source is selected on the unit. Another input source is selected on the TV. The input video signal (resolution) is not supported by the unit. The TV does not support HDCP (High-bandwidth Digital Content Protection). Remedy Use "Signal Info." in the "Option" menu (p. 20) to check the audio signal. For details, see "Checking information about the video/audio signals" in the Owner's Manual. Use "Test Tone" in the "Setup" menu (p. 21) to check the speaker output. For details, see "Outputting test tones" in the Owner's Manual. Perform YPAO (p. 15). Use "Configuration" in the "Setup" menu to change the speaker settings. For details, see "Configuring the speaker settings" in the Owner's Manual. Enable the Extra Bass function using the BASS key (p. 17). Perform YPAO (p. 15). Set "Subwoofer" in the "Setup" menu to "Use" (p. 21). For details, see "Setting the use of a subwoofer" in the Owner's Manual. Select an appropriate input source with the input selection keys. Switch the TV input to display the video from the unit. To check the information about the current video signal (resolution), see "Checking information about the video/audio signals" in the Owner's Manual. For information about video signals supported by the unit, see "HDMI signal compatibility" in the Owner's Manual. Refer to the instruction manuals for the TV and check the TV's specifications. If you want to play back contents that require HDCP 2.2-compatible devices, both the TV and playback device must support HDCP 2.2. En 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
En
23
No sound is coming from a
specific speaker.
The playback source does not contain a signal for the
channel.
Use “Signal Info.” in the “Option” menu (p. 20) to check the audio signal. For
details, see “Checking information about the video/audio signals” in the
Owner’s Manual.
The currently selected sound program/decoder does not
use the speaker.
Use “Test Tone” in the “Setup” menu (p. 21) to check the speaker output. For
details, see “Outputting test tones” in the Owner’s Manual.
Audio output of the speaker is disabled.
Perform YPAO (p. 15).
Use “Configuration” in the “Setup” menu to change the speaker settings. For
details, see “Configuring the speaker settings” in the Owner’s Manual.
No sound is coming from the
subwoofer.
The playback source does not contain LFE or low-
frequency signals.
Enable the Extra Bass function using the BASS key (p. 17).
Subwoofer output is disabled.
Perform YPAO (p. 15).
Set “Subwoofer” in the “Setup” menu to “Use” (p. 21). For details, see “Setting
the use of a subwoofer” in the Owner’s Manual.
No video.
Another input source is selected on the unit.
Select an appropriate input source with the input selection keys.
Another input source is selected on the TV.
Switch the TV input to display the video from the unit.
No video from the playback device
connected to the unit with HDMI.
The input video signal (resolution) is not supported by the
unit.
To check the information about the current video signal (resolution), see
“Checking information about the video/audio signals” in the Owner’s Manual.
For information about video signals supported by the unit, see “HDMI signal
compatibility” in the Owner’s Manual.
The TV does not support HDCP (High-bandwidth Digital
Content Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
If you want to play back contents that require HDCP 2.2-compatible devices,
both the TV and playback device must support HDCP 2.2.
Problem
Cause
Remedy