Yamaha RX-V390 Owner's Manual - Page 14

BASIC OPERATIONS 2 3 1, 6 TO PLAY A SOURCE 1 47 7 5 Play the source. (For detailed information on the tuning operation, refer to page 17.) 6 Set to the " ∞ " position. 2 Turn the power on. POWER Adjust to the desired output level. 7 If desired, adjust the BASS, TREBLE, BALANCE controls, etc. (refer to page 16) and use the digital sound field processor. (Refer to page 23.) 3 Select the desired input source by using the input selector buttons. (For video sources, turn the TV/monitor ON.) TAPE MONITOR TUNER CD PHONO COPY VCR MONITOR LD/TV * The name of the selected input source will appear in the display. 4 Select the front speakers to be used. SPEAKERS A B ON ON OFF OFF * If you use two front speaker systems, press both the A and B switches. 14 Notes on using the input selector buttons q Note that pressing on each input selector button selects the source which is connected to the corresponding input terminals on the rear panel. q The selection of TAPE MONITOR or VCR MONITOR cannot be canceled by pressing another input selector button. To cancel it, press it again. q In step 3, if two or more program sources are selected at the same time, be sure to remember the priority order of the input sources. Priority order of sources: 1) TAPE MONITOR, 2) VCR MONITOR, 3) LD/TV, TUNER, CD or PHONO. * If you select LD/TV, TUNER, CD or PHONO, be sure that neither TAPE MONITOR nor VCR MONITOR have been selected. * If you select TAPE MONITOR and VCR MONITOR and another input selector button at the same time, the playback result will be the video image from the VCR and the sound from the audio tape. * If you select both LD/TV and TAPE MONITOR at the same time, the playback result will be the video image from the LD player and the sound from the audio tape. * Once you play the LD player, its video image will not be interrupted even if other input selector buttons except VCR MONITOR are selected. To turn off the power Press the POWER switch again.