Yamaha RX-V585 RX-V585 Owner s Manual - Page 90
Setting the version of HDCP used on the HDMI input jacks
View all Yamaha RX-V585 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Setting the version of HDCP used on the HDMI input jacks Selects the HDCP version of the HDMI input jacks for watching 4K video content. Setup menu "HDMI" > "HDCP Version" Input sources HDMI 1-4 Settings Auto 1.4 Automatically sets the version of HDCP according to content. Sets the version of HDCP to always be 1.4. Setting the audio jack used for TV audio input Selects an audio input jack of the unit to be used for TV audio input when "HDMI Control" is set to "On". The unit's input source automatically switches to TV audio when the TV input is switched to its built-in tuner. NOTE For details on "HDMI Control" in the "Setup" menu, see the following: ▪ "Setting the use of HDMI Control" (p.89) Setup menu "HDMI" > "TV Audio Input" Settings AV 1-3, AUDIO 1-3 NOTE When using ARC to input TV audio to the unit, the input jacks selected here will be used for TV Audio Input. Linking the standby modes of the unit and the TV Select whether to use HDMI control to link the unit's standby mode to the TV's power when "HDMI Control" is set to "On". NOTE For details on "HDMI Control" in the "Setup" menu, see the following: ▪ "Setting the use of HDMI Control" (p.89) Setup menu "HDMI" > "Standby Sync" Settings Off On Auto Does not set the unit to standby mode when the TV is turned off. Sets the unit to standby mode when the TV is turned off. Sets the unit to standby mode when the TV is turned off only when the unit is receiving TV audio or HDMI signals. Setting the use of ARC Select whether to output TV audio to the speakers connected to the unit when "HDMI Control" is set to "On". NOTE For details on "HDMI Control" in the "Setup" menu, see the following: ▪ "Setting the use of HDMI Control" (p.89) Setup menu "HDMI" > "ARC" Settings Off Disables ARC. On Enables ARC. NOTE You do not need to change this setting normally. In case noises are produced from the speakers connected to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set "ARC" to "Off" and use the TV's speakers. 90 En