Yamaha RX-V592 Owner's Manual - Page 21
TAPE MONITOR indicator, TAPE MD MON - surround sound receiver
View all Yamaha RX-V592 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
English 1 Multi-information display Displays various information, for example station frequency, preset station number and name of selected input source. 2 MEMORY indicator When the MEMORY button is pressed, this indicator flashes for about 5 seconds. During this period, the displayed station can be programmed to the memory by using the A/B/C/D/E button and the preset station number selector buttons. 3 AUTO (TUNING) indicator Lights up when this unit is in the automatic tuning mode. 4 TAPE MONITOR indicator Lights up when the tape deck (or MD recorder etc.) is selected as the input source by pressing the TAPE (MD) MON button. 5 STEREO indicator Lights up when an FM stereo broadcast with sufficient signal strength is received. 6 Signal-level meter Indicates the signal level of the received station. If multipath interference is detected, the indication decreases. 7 Center channel mode indicators The name of a selected center channel mode lights up only when a program which uses the Dolby Pro Logic Surround decoder is selected. 8 DSP and PRO LOGIC indicators RX-V692 only "DSP" lights up when the built-in digital sound field processor is on, and " PRO LOGIC" lights up when the built-in Dolby Pro Logic Surround decoder is on. Both indicators light up when the digital sound field processor and the Dolby Pro Logic Surround decoder are on. 9 SLEEP indicator Lights up while the built-in SLEEP timer is functioning. 0 EFFECT OFF indicator RX-V592 only Lights up if neither the digital sound field processor nor the Dolby Pro Logic Surround decoder is on. In this state, sound output is 2-channel stereo. A DSP program indicators RX-V592 only The name of a selected DSP program lights up when the builtin digital sound field processor and/or the Dolby Pro Logic Surround decoder is on. 19