Yamaha RX-V596 Owner's Manual - Page 19

INTRODUCTION PREPARATION BASIC OPERATION ADVANCED OPERATION s VIDEO terminals (composite) DVD/LD player Cable TV/satellite tuner VIDEO OUT V VIDEO OUT V V V V V VIDEO IN VIDEO OUT VIDEO VIDEO OUT IN CONNECTIONS If your video components do not have "S" video terminals, they can be connected to this unit's VIDEO terminals. Be sure to connect the input (IN) and output (OUT) properly. Note • If video signals are input from both the S VIDEO input and composite input terminals, the signals will be directed to their respective output terminals. TV monitor TV/digital TV VCR V Video signal Signal flow s VIDEO AUX terminals (on the front panel) These terminals are used to connect any video input source such as a camcorder to this unit. S V L R AUDIO OUT R AUDIO OUT L VIDEO OUT Camcorder S VIDEO OUT Connecting to an External Decoder External decoder SURROUND MAIN OUT OUT CENTER OUT SUBWOOFER OUT LR LR (U.S.A. model) This unit has additional 6-channel audio signal input terminals for connecting an external decoder to this unit. Connect the 6-channel audio signal output terminals of the decoder to the EXTERNAL DECODER INPUT terminals of this unit. Notes • When a source connected to these terminals is selected, the digital sound field processor cannot be used. • The settings of "CENTER SP", "REAR SP", "MAIN SP" and "BASS OUT" on the SET MENU have no effect on a source connected to these terminals. The setting of "MAIN LVL" is effective. (Refer to pages 36 and 37 for details.) • Adjustment of the output level of the center speaker, rear speakers and subwoofer is effective when a source connected to these terminals is selected as the input source. (Refer to page 39 for details.) APPENDIX English 15