Yamaha RX-V671 Setup Guide - Page 7
If W-1: Out of Phase appears, Save/Cancel and press ENTER.
View all Yamaha RX-V671 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3 Use the cursor keys to select "Save/Cancel" and press ENTER. If "W-1: Out of Phase" appears Follow the procedure below to check the speaker connections. Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. 4 Use the cursor keys to select "SAVE" and press ENTER. 5 Disconnect the YPAO microphone from this unit. Now optimization of the speaker settings is complete. • Since the YPAO microphone is sensitive to heat, do not place the microphone in any place where it will be subjected to direct sunlight or high temperatures (top of an AV equipment, etc). Use the cursor keys to select "Result" and press ENTER. Use the cursor keys to select "Wiring". Check the cable connections (+/-) of the speaker indicated with "Reverse". If the speaker is connected correctly: You can save the current settings. Press RETURN and proceed to step 3. If the speaker is connected incorrectly: Turn off this unit, reconnect the speaker cable, and then try YPAO measurement again. En 7