Yamaha RX-V675 RX-V775/RX-V675 Owners Manual - Page 104
Types of information, Audio Signal, HDMI Monitor, Network, System, Multi Zone - firmware
View all Yamaha RX-V675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Types of information ■ Audio Signal Displays information about the current audio signal. Input Output Format Channel Sampling Bitrate Dialogue Audio format of the input signal The number of source channels in the input signal (front/surround/LFE) For example, "5.1 (3/2/0.1)" means 5.1ch in total (3 front channels, 2 surround channels, and LFE). The number of samples per second of the input digital signal The amount of data per second of the input bitstream signal The dialogue normalization level of the input bitstream signal The speaker terminals from which signals are output • Even when the unit is set to output bitstream signals directly, the signal may be converted depending on the specifications and settings of the playback device. ■ Video Signal Displays information about the current video signal. HDMI Signal HDMI Resolution Analog Resolution Presence or absence of HDMI signal input/output Resolutions of input signal (analog or HDMI) and output signal (HDMI) Resolutions of input signal (analog) and signal output at the MONITOR OUT jacks (analog) ■ HDMI Monitor Displays information about the TVs connected to the HDMI OUT jacks. Interface Video Resolution TV interface Resolutions supported by the TV • (RX-V775 only) Use the cursor keys (q/w) to switch between "OUT1" and "OUT2". ■ Network Displays the network information on the unit. IP Address Subnet Mask Default Gateway DNS Server (P) DNS Server (S) MAC Address Network Name Status IP address Subnet mask The IP address of the default gateway The IP address of the primary DNS server The IP address of the secondary DNS server MAC address Network name (the unit's name on the network) The connection status of the NETWORK jack ■ System Displays the system information on the unit. Remote ID The unit's remote control ID setting (p.105) TV Format The unit's video signal type (p.106) Speaker Impedance The speaker impedance setting of the unit (p.105) Tuner Freq. Step (Asia and General models only) The FM/AM tuning frequency setting of the unit (p.106) System ID System ID number Firmware Version The version of firmware installed on the unit • If the unit detects a newer firmware over the network, "!" (exclamation mark) appears at the upper right of the "Information" and "System" icons, and the corresponding message will be displayed in this screen. You can update the unit's firmware by pressing ENTER in this screen and following the procedure in "Updating the unit's firmware via the network" (p.113). ■ Multi Zone Displays information about Zone2. Input Volume The input source selected for Zone2 The volume setting for Zone2 CONFIGURATIONS ➤ Viewing information about the unit (Information menu) En 104