Yamaha SP2060 SP2060 V1 Owners Manual - Page 8

Foreword Foreword Introduction to the SP2060 The Controls and Connectors Panel Operation Thank you for purchasing the Yamaha SP2060 Speaker Processor. In order to take full advantage of the features and performance provided by the SP2060, we urge you to read this owner's manual thoroughly before connecting or using the unit. Keep this manual in a safe place for future reference. Accessories (Please make sure the following items are included in the package.) • SP2060 Owner's Manual (this document) • AC power cord • Rubber feet x 4 About the Firmware Version You can check the firmware version of your SP2060 in the UTILITY display (see page 28). You can also download the latest firmware from the following Yamaha website. http://www.yamahaproaudio.com/ About DME Designer DME Designer software enables you to control the SP2060 or DME series system from a connected computer. The DME Designer version 2.0 or later features this function. You can download DME Designer from the following Yamaha website. http://www.yamahaproaudio.com/ Precautions for Using a Rack-mounted SP2060 If you install the SP2060 along with other SP2060 units or other devices in a poorly ventilated rack, the ambient temperature inside the rack may rise, resulting in inefficient performance. Be sure to install the SP2060 in a well-ventilated rack and make sure that the heat will be ventilated efficiently. If the temperature inside the rack is expected to rise above 40 degrees Celsius or 104 degrees Fahrenheit (or if the ambient temperature outside the rack is expected to rise above 30 degrees Celsius or 86 Fahrenheit), install a fan kit in the top row of the rack. The fan must provide airflow of 1.6m3/min or more and static pressure of 5mmH2O or more. Fan kit SP2060 SP2060 Preparation Connecting the AC power cord Be sure to turn all devices OFF before connecting AC mains power. CAUTION First plug the female-connector end of the AC cord into the [AC IN] socket on the rear panel of the SP2060, then plug the male plug into an appropriate AC mains outlet. Be sure to use the voltage specified for the device. The required voltage is printed on the name plate of the device. Turning the power on and off CAUTION To prevent the initial power-on surge from generating a large noise spike or damaging your speaker system, turn devices on in the following order: audio sources, mixer (such as M7CL), SP2060, and finally power amplifiers. Reverse this order when turning power off. 1. Press the [POWER] switch to turn the power on to the SP2060. The SP2060 displays a message. SpeakerProcessor SP2060 2. Press the [POWER] switch again to turn off the power. NOTE The SP2060 remembers the scene settings when you turn off the power. When you turn on the power to the SP2060, it will start up with the same scene settings. You can also set up the SP2060 so that at the startup it will recall the scene selected before you turned off the power to the device (See page 33). CAUTION Do NOT turn off the power to the SP2060 while the unit is displaying the message "DO NOT TURN OFF!" at the bottom of the display, for example, while it is storing the scene. Otherwise, a malfunction may occur. Network Settings References SP2060 Owner's Manual 7