Yamaha SRT-1000 Owners Manual - Page 7

Connections Connect to a TV (or other peripheral device). Cautions • Do not connect the power cable of the unit to the AC wall outlet before making connections. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or terminal. 1 Remove the jack cover on the top panel of the unit. 2 Connect the TV and unit with the optical cable (supplied). Remove the cap of the optical cable and check the direction of the plug. To AC wall outlet Unit (rear) Overhead view Power cable Jack cover 3 Connect the power cable of the unit to an AC wall outlet. 4 Set the TV as follows. • Set the TV volume to minimum. • Disable the TV built-in speaker output (if available). 5 Attach the jack cover. HINT • If a setting to disable the speaker output is not available on your TV, you may disable it by connecting headphones to the headphone jack on the TV. For details, refer to the manuals of the TV. • The TV, BD/DVD and COAXIAL input jacks support the following audio signals. − PCM (2ch) − Dolby Digital (up to 5.1 channels) − DTS Digital Surround (up to 5.1 channels) HINT In the following cases, connect the optical output of the playback device to the BD/DVD input of the unit with an optical cable (commercially available), then select the BD/DVD key on the remote control for the input source. • The TV does not have an optical output. • The TV does not output audio (or outputs low volume audio) from the connected playback device. • The audio from the playback device connected to the TV cannot be heard as surround sound. Optical cable (commercially available) Optical cable OPTICAL OUTPUT TV HDMI cable (etc.) OPTICAL OUTPUT Playback device (such as a BD player) Set top box En 5