Yamaha StageMix User's Guide - Page 15

Screen areas Processing area Displays each channel's EQ, INPUT, GATE, COMP, GEQ, and SEND PAN (when using SENDS ON FADER mode). The type of information displayed here varies depending on the type of channel. You can swipe left and right in this area to display other information. The type of information displayed in the processing area changes for all channels. The type of information that can be displayed in this area for each type of channel is explained below. CH 1-32 CH 33-40 Input   EQ   Gate  - Comp  - GEQ - - Send Pan   ST IN 1L-2R FX 1L-2R DCA 1-8 STEREO AUX 1-8 AUX 9/10- AUX 19/20 SUB - - - - - -     - - - - - -     -   - - - - - - - MON - - - - - - Fader area Allows you to adjust the fader and cue for each channel. ձ ղ ճ մ յ 1 ON button Turns the channel on and off. This button lights when the channel is turned on. 2 Fader value Displays the value of the current fader level. You can tap the value and then increase and decrease it by tapping the up and down arrows. 3 Fader Drag the fader's knob up and down to adjust the fader level. The fader stops at the nominal level (0dB); you can then continue to drag it up or down as desired. You can drag the fader left and right and then up and down to adjust it more precisely. You can adjust multiple faders at the same time. NOTE If you have adjust the Fader Delay setting on the PREFERENCE screen (page 12), the fader value is displayed in light blue when the fader can be adjusted. - 15 - TF StageMix User's Guide