Yamaha TSR-7810 TSR-7810 Owner s Manual - Page 123
Configuring the system settings (ADVANCED SETUP menu), System, Multi Zone
View all Yamaha TSR-7810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
(When using Wireless Direct) SSID Security Security Key IP Address Subnet Mask MAC Address (Wi-Fi) Network Connection The SSID of the wireless network Security method Security key IP address Subnet mask MAC address "Wireless Direct" indication ⬛ System Displays the system information on the unit. Remote ID TV Format Speaker Impedance Tuner Freq. Step System ID Firmware Version The unit's remote control ID setting (p.124) The unit's video signal type (p.125) The speaker impedance setting of the unit (p.124) (Asia and General models only) The FM/AM tuning frequency setting of the unit (p.124) System ID number The version of firmware installed on the unit X If the unit detects a newer firmware over the network, (mail icon) appears at the upper right of the "Information" and "System" icons, and the corresponding message will be displayed in this screen. You can update the unit's firmware by pressing ENTER in this screen and following the procedure in "Updating the unit's firmware via the network" (p.127). ⬛ Multi Zone Displays information about Zone2. Input Volume The input source selected for Zone2 The volume setting for Zone2 Configuring the system settings (ADVANCED SETUP menu) Configure the system settings of the unit while viewing the front display. 1 Set the unit to standby mode. 2 While holding down STRAIGHT on the front panel, press MAIN ZONE z. MAIN ZONE z PROGRAM STRAIGHT 3 Press PROGRAM to select an item. 4 Press STRAIGHT to select a setting. 5 Press MAIN ZONE z to set the unit to standby mode and turn it on again. The new settings take effect. En 123