Yamaha TSS-10 Owner's Manual - Page 2

CAUTION, For U.K. customers, Special Instructions for U.K. Model - user manual

Get Yamaha TSS-10 PDF manuals and user guides View all Yamaha TSS-10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

CAUTION: READ THIS BEFORE OPERATING YOUR SYSTEM. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place with at least 20 cm on the top, 10 cm on the left and right, and 10 cm at the back of the amplifier unit - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. 3 Locate this system away from other electrical appliances, motors, or transformers to avoid humming sounds. To prevent fire or electrical shock, do not place this system where it may get exposed to dripping or splashing, and never put any objects filled with liquids, such as vases, on the top of the system. 4 Do not expose this system to sudden temperature changes from cold to hot, and do not locate this system in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this system, which may cause an electrical shock, fire, damage to this system, and/or personal injury. 5 Avoid installing this system in a place where foreign objects and liquid might fall. It might cause a fire, damage to this system and/or personal injury. Do not place the following objects on this system: - Other components, as they may cause damage and/or discoloration on the surface of this system. - Burning objects (i.e. candles), as they may cause fire, damage to this system, and/or personal injury. - Containers with liquid in them, as they may cause electrical shock to the user and/or damage to this system. 6 Do not cover this system with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this system rises, it may cause fire, damage to this system, and/or personal injury. 7 Do not plug in this system to a wall outlet until all connections are complete. 8 Do not operate this system upside-down. It may overheat, possibly causing damage. 9 Do not use force on switches, knobs and/or cables. 10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable. 11 Do not clean this system with chemical solvents; this might damage the finish. Use a clean, dry cloth. 12 Only voltage specified on this system must be used. Using this system with a higher voltage than specified is dangerous and may cause fire, damage to this system, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this system with a voltage other than specified. 13 To prevent damage by lightning, disconnect the power cable from the wall outlet during an electrical storm. 14 Take care of this system so that no foreign objects and/or liquid drops inside this system. 15 When using a humidifier, be sure to avoid condensation inside this system by allowing enough spaces around this system or avoiding excess humidification. Condensation might cause a fire, damage to this system, and/or electric shock. 16 Do not attempt to modify or fix this system. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons. 17 When not planning to use this system for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet. 18 Be sure to read the "TROUBLESHOOTING" section on common operating errors before concluding that this system is faulty. CAUTION 19 Before moving this system, press STANDBY/ON to set this system in the standby mode, and disconnect the AC power plug from the wall outlet. 20 Be sure to only use the AC adaptor (LSE9802B1540) included with this system. Otherwise, you might cause a fire or damage to this system. 21 This system is designed for home use only. Never use this system in a car, etc., otherwise it may cause a malfunction of this system. This system is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this system itself is turned off. This state is called the standby mode. In this state, this system is designed to consume a very small quantity of power. FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES003. I For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note • The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. I Special Instructions for U.K. Model IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. IMPORTANT Please record the serial number of this system in the space below. MODEL: Serial No.: The serial number is located on the rear of the amplifier unit. Retain this Owner's Manual in a safe place for future reference.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
CAUTION
1
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2
Install this sound system in a well ventilated, cool, dry, clean
place with at least 20 cm on the top, 10 cm on the left and
right, and 10 cm at the back of the amplifier unit — away
from direct sunlight, heat sources, vibration, dust, moisture,
and/or cold.
3
Locate this system away from other electrical appliances,
motors, or transformers to avoid humming sounds. To
prevent fire or electrical shock, do not place this system
where it may get exposed to dripping or splashing, and never
put any objects filled with liquids, such as vases, on the top
of the system.
4
Do not expose this system to sudden temperature changes
from cold to hot, and do not locate this system in a
environment with high humidity (i.e. a room with a
humidifier) to prevent condensation inside this system,
which may cause an electrical shock, fire, damage to this
system, and/or personal injury.
5
Avoid installing this system in a place where foreign objects
and liquid might fall. It might cause a fire, damage to this
system and/or personal injury. Do not place the following
objects on this system:
–
Other components, as they may cause damage and/or
discoloration on the surface of this system.
–
Burning objects (i.e. candles), as they may cause fire,
damage to this system, and/or personal injury.
–
Containers with liquid in them, as they may cause
electrical shock to the user and/or damage to this system.
6
Do not cover this system with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this system rises, it may cause fire,
damage to this system, and/or personal injury.
7
Do not plug in this system to a wall outlet until all
connections are complete.
8
Do not operate this system upside-down. It may overheat,
possibly causing damage.
9
Do not use force on switches, knobs and/or cables.
10
When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11
Do not clean this system with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12
Only voltage specified on this system must be used. Using
this system with a higher voltage than specified is dangerous
and may cause fire, damage to this system, and/or personal
injury. YAMAHA will not be held responsible for any
damage resulting from use of this system with a voltage
other than specified.
13
To prevent damage by lightning, disconnect the power cable
from the wall outlet during an electrical storm.
14
Take care of this system so that no foreign objects and/or
liquid drops inside this system.
15
When using a humidifier, be sure to avoid condensation inside
this system by allowing enough spaces around this system or
avoiding excess humidification.
Condensation might cause a
fire, damage to this system, and/or electric shock.
16
Do not attempt to modify or fix this system. Contact
qualified YAMAHA service personnel when any service is
needed. The cabinet should never be opened for any reasons.
17
When not planning to use this system for long periods of
time (i.e. vacation), disconnect the AC power plug from the
wall outlet.
18
Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this system
is faulty.
CAUTION: READ THIS BEFORE OPERATING YOUR SYSTEM.
19
Before moving this system, press STANDBY/ON to set this
system in the standby mode, and disconnect the AC power
plug from the wall outlet.
20
Be sure to only use the AC adaptor (LSE9802B1540)
included with this system.
Otherwise, you might cause a fire
or damage to this system.
21
This system is designed for home use only. Never use this
system in a car, etc., otherwise it may cause a malfunction of
this system.
This system is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this system
itself is turned off. This state is called the standby mode. In
this state, this system is designed to consume a very small
quantity of power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide
slot and fully insert.
This Class B digital apparatus complies with Canadian ICES-
003.
■
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the instructions
described below.
Note
•
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
■
Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L or
coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
IMPORTANT
Please record the serial number of this system in the space below.
MODEL:
Serial No.:
The serial number is located on the rear of the amplifier unit.
Retain this Owner’s Manual in a safe place for future reference.