Yamaha TSX-130BL Owners Manual - Page 17

OPERATION LISTENING TO MUSIC Listening to a USB device Note You can remove your USB device whenever you want. ■ Playing back normally ■ Switching the playback information display 1 Set your USB device into the USB port. This unit supports USB mass storage class devices (e.g., flash memories or portable audio players) using FAT16 or FAT32 format. Switch the display in USB playback mode. Press repeatedly. Notes • Some devices may not work properly even if they meet the requirements. • Do not connect devices other than USB mass storage class devices (such as USB chargers or USB hubs), PCs, card readers, an external HDD, etc. • Yamaha will not be held responsible for any damage to or data loss on the USB device occurring while the device is connected to this unit. • Playability of and power supply to all kind of USB devices are not guaranteed. 2 Select USB. Playback starts. You can change the information display as follows. Elapsed time of the current track (default setting) ↓ Track name* ↓ Artist name* ↓ Album name* ↓ File name ↓ Back to the default setting * Only when the selected file has information y On MP3/WMA files, refer to "NOTES ON DISCS AND USB DEVICES" (☞ P. 19). Note The reading time may exceed 30 seconds, depending on the number of files/folders. ■ Playing back in random sequence/ repeatedly After the above steps 1 and 2, you can enjoy random and repeat mode. Set in the same way as for CDs (☞ P. 12). English 13 En