Yamaha TSX-B235 TSX-B235 Owners Manual - Page 25

English TROUBLESHOOTING Problem When you insert a disc, the front panel display indicates "CD No Disc" or "CD Unknown." Cause The disc loaded into the unit may not be compatible. The disc may be dirty, or a foreign object may have adhered to it. The disc does not contain playable files. The disc was inserted upside down. Solution Use a disc supported by the unit (+ P. 23). Wipe the disc clean. Alternatively, remove any foreign object that has adhered to the disc (+ P. 23). Use a disc contains playable files (+ P. 23). Insert the disc with the label facing upward. USB device playback Problem Cause MP3/WMA file in the USB device The USB device is not recognized. does not play. When you connect a USB device, the front panel display indicates "USB OverCurrent," and then the front panel display goes blank. The USB device does not contain playable files. An incompatible USB device was connected to the unit. Alternatively, the USB device is not connect firmly to the unit. Solution Make sure the USB device is connected to USB port instead of CHARGING port. Turn the unit off and reconnect the USB device to the unit. If the solutions above do not resolve the problem, the USB device is not playable on the unit (+ P. 23). Use a USB device contains playable files (+ P. 23). Turn the unit off and reconnect the USB device to the unit. If it does not resolve the problem, the USB device is not playable on the unit (+ P. 23). Bluetooth Problem Cannot make this unit paired with the other component. Can't establish a Bluetooth connection. No sound is produced or the sound is interrupted during playback. Cause Solution The other component does not support A2DP. A Bluetooth adaptor, etc. that you want to pair with this unit has a password other than "0000". Perform pairing operations with a component which supports A2DP. Use a Bluetooth adaptor, etc. whose password is "0000". This unit and the other component are too far apart. Move the other component closer to this unit. There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.4 GHz frequency band nearby. This unit is not registered on the other component's Bluetooth connection list. The Bluetooth connection of this unit with the other component is disconnected. Move this unit away from the device that is emitting radiofrequency signals. Perform pairing operations again (+ P. 10). Perform Bluetooth connection operations again (+ P. 11). This unit and the other component are too far apart. Move the other component closer to this unit. There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.4 GHz frequency band nearby. The other component's Bluetooth function is off. The other component is not set to send Bluetooth audio signals to this unit. Move this unit away from the device that is emitting radiofrequency signals. Turn on the Bluetooth function of the other component. Check that the Bluetooth function of the other component is set properly. The pairing setting of the other component is not Set the pairing setting of the other component to this unit. set to this unit. The other component's volume is set to the minimum. Increase the volume level. 21 En