Yamaha VXS VXS/VXC Series Painting Guide - Page 2
Vxc4 / Vxc4w / Vxc6 / Vxc6w / Vxc8 / Vxc8w, Caution
View all Yamaha VXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Reattaching the grille Reattach the grille and emblem by reversing the steps of "Removing the grille". • Reattach the emblem in the correct position. NOTE Do not apply force at the center area of the grille, as it may be distorted. Painting the bracket 1 Paint the bracket using spray-type paint. 1 • Cover the shaft of the bracket base with masking materials to avoid paint contact. 2 Allow the applied paint to completely dry. Shaft of bracket base VXC4 / VXC4W / VXC6 / VXC6W / VXC8 / VXC8W Painting the grille 1 Remove the emblem on the front of the grille. 1 • The emblem is attached by adhesive tape. 2 Paint the grille using spray-type paint. • We recommend removing the non-woven material behind the grille. 3 Allow the paint to completely dry. 4 Reattach the emblem to the grille. • If the non-woven material was removed, replace it in the original 2 position. • Use the center hole of the non-woven material as a guide, and reattach the emblem to the grille. 4 CAUTION ■ Work in an area that has adequate ventilation. ■ Painting procedures often require the use of volatile solvents. Follow all necessary safety precautions to avoid any risk of a fire. ■ Work carefully to avoid injury when removing/attaching the grille. ■ Yamaha cannot be held responsible for any damage to the speaker(s) as a result of painting them.