Yamaha Version1.1 Version1.1 Owner's Manual - Page 2
Restoring to an I/O card
View all Yamaha Version1.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
2 Hold down the [SHIFT] key and press the [F1] (Backup) key. A popup window will appear, allowing you to back up the I/O card settings. Restoring to an I/O card When an AW2816 scene is recalled (or when a song is loaded), the MEM.BANK settings are automatically restored to the I/O card in option slot. However if necessary, you can also perform the restore operation manually. The procedure is as follows. 1 Press the [PATCH] ¡ [F4] key to access the Plug-in page. 3 Move the cursor to the MEM.BANK button, and press the [ENTER] key. If the memory bank already contains data, the bank name will be displayed. If it does not contain data, the display will indicate "NO DATA!" The bank name is assigned automatically according to the type of I/O card installed. It is not possible for you to edit this name. 4 To execute the backup, move the cursor to the OK button and press the [ENTER] key. The settings of the I/O card will be saved in the current song. 2 Hold down the [SHIFT] key and press the [F2] (Restore) key. A popup window will appear, allowing you to restore the I/O card settings. 3 Move the cursor to the MEM.BANK button, and press the [ENTER] key. If the memory bank already contains data, the bank name will be displayed. If it does not contain data, the display will indicate "NO DATA!" 4 To execute the Restore operation, move the cursor to the OK button and press the [ENTER] key. The saved settings will be loaded into the I/O card.