Yamaha XM4220 Owner's Manual - Page 9
Specifications
View all Yamaha XM4220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Specifications s General Specifications Power Output Level (Rated Power) 20 Hz~20 kHz THD+N= 0.2% 8Ω 4Ω 8Ω/BRIDGE 1 kHz THD+N= 0.2% 8Ω 4Ω 8Ω/BRIDGE 70.7V/BRIDGE Power Bandwidth Half Power Total Harmonic Distortion (THD + N) 20 Hz~20 kHz, Half Power Frequency Response 8Ω, Po= 1 W Intermodulation distortion (IMD) 60 Hz:7 kHz, 4:1, Half Power Channel Separation Half Power, RL= 8Ω, 1 kHz Vol. max., input 600Ω shunt Residual Noise Vol. max. 12.7 kHz LPF SN Ratio 12.7 kHz LPF Damping Factor 8Ω, 1f= 1 kHz Sensitivity (Vol. max.) Rated Power into 8Ω Voltage Gain (Vol. max.) Input Impedance Controls Front Panel Rear Panel Connectors Indicators Protection Circuits PC limiter Fan Speed Power Requirements Power Consumption Dimensions (W x H x D) Weight Accesaries Input Output POWER PROTECTION CLIP SIGNAL US & Canada Europe Other Idling 1/8 output power, 4Ω Maximum output, 4Ω XM6150 100 W x 6 120 W x 6 240 W x 3 120 W x 6 150 W x 6 300 W x 3 150 W x 3 10 Hz~40 kHz (THD+N= 1%) XM4220 140 W x 4 180 W x 4 360 W x 2 170 W x 4 220 W x 4 440 W x 2 350 W x 2 ≤0.2% 0 dB, 0.5 dB, -1 dB 20 Hz~50 kHz ≤0.2% ≥60 dB ≤ -68 dB ≤-66.5 dB 100 dB ≥100 0 dB 32.1 dB 33.6 dB 30 kΩ/Balanced, 15 kΩ/Unbalanced POWER switch (ON/OFF) Volume (31 position) /ch BRIDGE switch (ON/OFF) /2ch HPFswitch (ON/OFF) /ch fc=80 Hz, -12 dB/oct. CH A TO ALL CH switch XLR-3-31 type/ch Euroblock connector 5-way binding posts Green Red Red Green POWER switch ON muting, DC detection, Temp. detection (heatsink temp ≥ 85°C) RL ≤ 2 Ω Low/~50°C, Variable, High/70°C~ 120 V, 60 Hz 230 V, 50 Hz 240 V, 50 Hz 45 W 400 W/550 VA 1800 W 45 W 400 W/500 VA 1800 W 480 x 132 x 319 mm 18 kg 18 kg Euroblock connector x 6 Euroblock connector x 4 0 dB=0.775 Vrms, Half Power=1/2 Power Output Level (Rated Power) Specifications subject to change without notice. For European Model Purchaser/User information specified in EN55103-1 and EN55103-2. Inrush Current: 56A Conformed Enviroment: E1, E2, E3 and E4. 9