Yamaha Y-S3 Y-S3 V3.1 Manual - Page 16
Select Venue Geometry, You can change the zoom for Top View and Right-Side View by clicking
![]() |
View all Yamaha Y-S3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Yamaha Sound System Simulator Y-S3 Owner's Manual V3.1 Select Venue Geometry(Step2/2): Edit the selected shape with the Top View and Right-Side View. Use your mouse to select an orange point on a view (selected point turns black), then drag the point to the desired position. You may also select a point, and enter the desired three-dimensional coordinates. The range of each dimension is shown below. Note that for the 2nd to the 4th floors, y is the distance from the reference point. The reference points of the 2nd to the 4th floors can be varied between of -100.00 m to 100.00 m (-328.08 ft to 328.08 ft).. Stage 1st Floor 2nd ~4th Floor x : width -45.00m~-0.01m (-147.64~-0.03ft) -45.00m~-0.01m (-147.64ft~-0.03ft) -60.00m~-0.01m (-196.85ft~-0.03ft) y : depth -90.00m~90.00m (-295.28ft~295.28ft) -90.00m~90.00m (-295.28ft~295.28ft) -90.00~90.00m (-295.28ft~295.28ft) z : height 0.00m~2.00m (0.00ft~6.56ft) 0.00m~45.0m (0.00ft~147.64ft) 0.00m~50.0m (0.00ft~164.04ft) You can change the zoom for Top View and Right-Side View by clicking If there are multiple floors, edit the shape for each floor. Select a template from the left side, and edit the shape. If you change the template after setting the coordinates of each point, the coordinates will be reset. 16
![](/manual_guide/products/yamaha-ys3-ys3-v31-manual-a119d6a/16.png)