Yamaha YAS-105 Owners Manual - Page 8

Connections Connect to a TV (or other peripheral device). CAUTIONS • Do not connect the power cable of the sound bar to the AC wall outlet before making connections. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or terminal. 1 Connect the TV and sound bar with the optical cable (supplied). Remove the cap of the optical cable and check the direction of the plug. Sound bar (rear) To AC wall outlet Power cable 57 #%%7% "/"-0( 46#800'&3
065 Optical cable 2 Connect the power cable of the sound bar to an AC wall outlet. 3 Set the TV as follows. • Set the TV volume to minimum. • Disable the TV built-in speaker output (if available). OPTICAL OUTPUT TV HINT • If a setting to disable the speaker output is not available on your TV, you may disable it by connecting headphones to the headphone jack on the TV. For details, refer to the manuals of the TV. • The TV and BD/DVD input jacks support the following audio signals. − PCM (2 channel) − Dolby Digital (up to 5.1 channel) HDMI cable (etc.) Playback device (such as a BD player) Set top box HINT In the following cases, connect the coaxial digital audio output of the playback device to the BD/DVD input of the sound bar with a coaxial digital cable (commercially available), then select the BD/DVD key on the remote control for the input source. − The TV does not have an optical output. − The TV does not output audio (or outputs low volume audio) from the connected playback device. − The audio from the playback device connected to the TV cannot be heard as surround sound. 6 En