Yamaha YAS-109 YAS-109 Owners Manual - Page 41
Updating the unit’s firmware, Selecting the HDMI signal format, Turn on the unit.
View all Yamaha YAS-109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Updating the unit's firmware New firmware that provides additional features or product improvements will be released as needed. Firmware can be updated using the Sound Bar Controller app installed on a mobile device. n NOTICE • Do not operate the unit or disconnect the power cord or network cable during firmware update. • If the Internet connection speed is slow, or the unit is connected to the wireless network, network update may not be possible depending on the condition of the network connection. Should this occur, try again at a later time. • For details on update, visit the Yamaha website. When a new firmware is released, a "NEW" icon is displayed on the screen of the Sound Bar Controller app. Tap the icon, then follow the onscreen instructions to update the firmware. Selecting the HDMI signal format Problems such as a lack of sound or the appearance of abnormal colors in a video may occur when some AV devices are connected to the unit. Should this occur, changing the setting may resolve these issues. Mode 1 (default) Mode 2 Select this mode in most cases. Select this mode if problems such as the appearance of abnormal colors in video have occurred. 1 Turn on the unit. 2 Press STEREO for at least five seconds. STEREO Once the indicator has shown the setting applied to the unit as follows, the unit will turn on. Glows (mode 1) Off (mode 2) 41 En