Yamaha YDP-105 YDP-105 Owners Manual - Page 16

Keyboard Stand Assembly Assembly Precautions CAUTION • Assemble the instrument using at least two people. • Assemble the instrument on a hard and flat floor with ample space. • Be sure to use the correct parts in the correct orientation, and assemble the instrument in accordance with the sequence given here. • Keep small parts (such as screws) out of the reach of infants. Children may accidentally swallow them. • Be sure to use only the included screws of specified sizes. Use of any other screws can cause damage or malfunction of the product. • To disassemble the unit, reverse the assembly sequence given here. Have a Phillips-head (+) screwdriver of the appropriate size ready. Assembly You can watch a video of the assembly. Scan the QR code at left or access the website below. https://4wrd.it/ydp_assembly_video3 Check if you have all of the items indicated below. NOTICE Make sure to place the main unit on the polystyrene foam pads that have been removed from the packages. Position the pads so that they will not contact the speaker covers on the bottom of the main unit. Main unit Post-assembly checklist • There are no unused parts. • The instrument is stable even if you shake it. • The pedal adjuster is firmly pressed against to the floor surface. • Both the pedal cord and power cord are plugged securely into the correct jacks. → If there are any items above you haven't confirmed, review the assembly procedure and correct any errors. Speaker cover Polystyrene foam pads Speaker cover Back board Pedal box Cord holder Side board (L) Side board (R) × 4 × 2 Flat head screws (6 × 20 mm) Thin screws (4 × 12 mm) × 4 Tapping screws (4 × 20 mm) × 4 Thick screws (6 × 16 mm) 16 YDP-105 Owner's Manual AC adaptor * The adaptor may not be included, or may look different from the illustration above, depending on your particular area.